MINI Gen 2 - Inspection 2

Previous productOil & Filter Service - R56

Next productEngine Health Check & Dyno ...

Our inspection 2 is perfect for those cars needing a thorough service - our MINI specialists will thoroughly check over your car making sure your MINI is refreshed and ready to go. (Please note as the Inspection 2 is thorough the mechanic may find that there are some parts which would need to be bought to your attention - if you would like these replacing the price will be altered to accommodate the parts and labour)

Be the first to review this product

£320.40

Qty:

Remove and replace engine oil with 5 litres of Millers NanoDrive 5W-40.
Remove and replace engine oil filter and o-ring.
Remove and replace air filter element.
Remove and replace spark plugs.
Remove and replace interior ventilation microfilter.
Inspect tyre condition, measure tread depth and check and adjust tyre pressures.
Check entire vehicle for leaks (engine, transmission, power steering, fuel lines, brake lines etc.).
Check CV joint boots for damage or leaks.
Check condition, position and mounting of exhaust system.
Check struts and shock absorbers for leaks.
Check suspention bushes and ball joints for excess play.
Check overall thickness of front and rear brake pads and examine brake disc surface and thickness.
Check condition of hard brake lines for corrosion and flexible lines for rubber perishing, rubbing and leaks.
Check entire body for rust and corrosion.
Check engine coolant system for leaks, check level and test antifreeze protection level.
Check windshield washer fluid level.
Check operation of: headlights, foglights, parking lights, reverse lights, indicators, hazard lights, brake lights, number plate lights, interior lights.
Check for dashboard warning lights and read fault codes if necessary.
Check operation of horn.
Check wipers and widshield washer system.
Check condition and function of seat belts.
Check operation of converrtible top (if applicable).
Reset service interval display.

Overview
Reviews
Contact Us

Remove and replace engine oil with 5 litres of Millers NanoDrive 5W-40.
Remove and replace engine oil filter and o-ring.
Remove and replace air filter element.
Remove and replace spark plugs.
Remove and replace interior ventilation microfilter.
Inspect tyre condition, measure tread depth and check and adjust tyre pressures.
Check entire vehicle for leaks (engine, transmission, power steering, fuel lines, brake lines etc.).
Check CV joint boots for damage or leaks.
Check condition, position and mounting of exhaust system.
Check struts and shock absorbers for leaks.
Check suspention bushes and ball joints for excess play.
Check overall thickness of front and rear brake pads and examine brake disc surface and thickness.
Check condition of hard brake lines for corrosion and flexible lines for rubber perishing, rubbing and leaks.
Check entire body for rust and corrosion.
Check engine coolant system for leaks, check level and test antifreeze protection level.
Check windshield washer fluid level.
Check operation of: headlights, foglights, parking lights, reverse lights, indicators, hazard lights, brake lights, number plate lights, interior lights.
Check for dashboard warning lights and read fault codes if necessary.
Check operation of horn.
Check wipers and widshield washer system.
Check condition and function of seat belts.
Check operation of converrtible top (if applicable).
Reset service interval display.

Your name *

Your email *

Enquiry *

Product tags

R56 (4)
,
jcw (2)
,
r56 service (1)